Antique Marbre HD 62
$87.20 – $430.55 1L / 5L Bottle
Colour Enhancer for Interior and Exterior Usage
Description
ANTIQUE MARBRE HD62 is a protective reviving product with autocatalytic action. The product has high resistance to chemical agents, acid rain and atmospheric agents, to oils, acids, fats and organic substances. ANTIQUE MARBRE HD 62 enhances the shades of the materials that acquire a satin shine as well as an antique look meanwhile being restored. Product is suitable to treat external floorings made of flamed, bush hammered, saw-cut, acidulated and sanded raw Natural Stone (marble, travertine, etc.). After treatment, the surface will be protected from oily or watery dirt by a tight glossy barrier.
HOW TO USE
Dilution : The product should not be diluted (only to treat very compact and slightly porous surfaces, some “nitro” solvent or ethyl alcohol can be added to the product – i.e.: 0.800 cc ANTIQUE MARBRE + 0.200 cc “nitro” solvent.
Application : Wash the floor with the neutral detergent and rinse carefully with clear water; when the surface is perfectly dry, apply ANTIQUE MARBRE HD62 evenly using a white piece of cloth, a brush or a fine rectangular sponge (of that kind used by the tile layers), mounted on pliers, to be well wrung before going over the floor. The product can also be sprayed by an airless spray-gun with 0,5÷1 bar nozzle and then evened up with a short-haired roller. The surface can be walked on 24 hours following treatment with ANTIQUE MARBRE HD 62. The protection action will start to be effective after 24 to 48 hours and will be complete within about 5-7 days, according to the environmental humidity degree. For ordinary cleaning, use a neutral detergent such as: DETERGON R3, ACHYTER or BIOSAN. N.B. If desired, the glossy effect can be reduced going over the treated surface with Ethyl Alcohol; this operation should be carried out no later than 2-3
PRECAUTIONS
Do not apply the product on too hot surfaces or under direct sunlight. Do not walk on the floor if still not dry.
COVERAGE
Approx.10 -12 litres for 100 sq m depending upon the porosity of the material.
WARNINGS
Refer to the MSDS available upon request.
PACKAGING
1L/5L Bottle
Additional information
| Surface | Ceramic, Compressed Marble/Quartz, Granite, Homogeneous, Limestone/Sandstone, Marble, Terrazzo |
|---|---|
| PLEASE SELECT YOUR PACKAGING: | 1L, 5L |
Detergon R3
Biosan
Sanny Kal
HM 2
Most Viewed Products
-
Kalgres
Mild Acid Cleaner$32.70 – $158.05Select options This product has multiple variants. The options may be chosen on the product page -
Detergon R3
Multi purpose Cleaner for Natural Stone & Tiles$38.15 – $185.30Select options This product has multiple variants. The options may be chosen on the product page -
CTF-40
Solvent based Impregnator - Oil & Water Repellent$43.60 – $212.55 /bottleSelect options This product has multiple variants. The options may be chosen on the product page -
IPS 100
Colour/Wood Stain Remover$54.50 – $250.70 1L/5L DrumSelect options This product has multiple variants. The options may be chosen on the product page -
-
Idrobase 303
Water based Impregnator - Oil & Water Repllent$34.88 – $168.95 /bottleSelect options This product has multiple variants. The options may be chosen on the product page
Recently Viewed Products
-
-
Biosan
Floor Cleaner for Natural Stone & Parquet$32.70 – $158.05Select options This product has multiple variants. The options may be chosen on the product page -
Detergon R3
Multi purpose Cleaner for Natural Stone & Tiles$38.15 – $185.30Select options This product has multiple variants. The options may be chosen on the product page -
ALCO CLEAN
is a ready-to-use sanitizing detergent with the addition of alcohol, suitable for all surfaces.$27.25 -
Imprim RTF (Colour Corrector)
Colour Enhancer with Colour Optional$87.20 – $430.55 1L / 5L BottleSelect options This product has multiple variants. The options may be chosen on the product page -
Reviews
There are no reviews yet.