Water-repellent product suitable to natural stones, marble, granite, stone agglomerates, baked tiles, terracotta, exposed brickwork and cement.
HOW TO USE
Dilution: Product should not be diluted.
Application : To clean the marble and natural stone surfaces with suitable detergent. On clean and perfectly dry surface, apply the product with a brush or roller in a regular manner, even impregnating the joints.
For applying the product on vertical surfaces, the spray gun system (airless) is recommended in two hands (wet on wet). On lowabsorbing natural stones, such as slate, use only one hand of PRIMALAS / 92. If the product is applied in two hands, as recommended by us, its durability (both indoor and outdoor) is not less than 15-20 years, excluding marine areas and near the sea. Before using the product, always try a sample test on a small surface to check that the material does not change color.
Before apply it, it is advisable to always make a sample test on a small portion of surface in order to prevent any unwanted change in colour.
The product should not be applied on outdoor surfaces exposed to sunlight or during the hottest hours of the day; no rain should be forecast for at least two days following treatment.
Hand-made terracotta : Approx.12/15 lt every 100 sq.m. per coat.
Mechanical terracotta : Approx.10/12 lt every 100 sq.m. per coat.
Very porous natural stones : Approx. 12/15 lt every 100 sq. m. per coat.
Granite and marbles with low absorbency : Approx. 8/10 lt every 100 sq. m. per coat.
Cement : Approx. 12/15 litres every 100 sq. m. per coat.
Refer to the MSDS available upon request.
Ceramic, Compressed Marble/Quartz, Granite, Homogeneous, Limestone/Sandstone, Marble, Terrazzo