Idrobase 303

Description

Ecological in-depth water-based oil and water-repellent product with anti-stain properties.
* The product has been assessed according to the assessment criteria of the Singapore Green Building product certification scheme *

HOW TO USE

Apply the product to a clean, perfectly dry surface, or slightly wet using a polish spreader, a short-haired roller, a flat brush or a low-pressure spray gun and wait for 24 hours before applying resin/wax treatment.

For external works, it is advisable to wait two to three days after the washing when the surface becomes completely dry and then apply the product in 2-3 coats, with 3-4 hours between each coat. The oil-water-repellent protective property is reached after 24/48 hours and depending on the amount of applied product hands. After drying, remove any excess product from the marble with a soft and dry cloth, with a single brush giving to the treated surface an original gloss. No over product is to be removed from rough surfaces, such terracotta or non-polished natural stones.

COVERAGE

Natural stone: Approx. 8/12 litres every 100 sq.m. per coat, according to the porosity of the surface.
Very porous terracotta: Approx. 12/15 lt every 100 sq.m. per coat.
Mechanical terracotta: Approx 10/12 lt every 100 sq.m. per coat.

PRECAUTIONS

No alcohol should ever be used to clean surfaces treated with IDROBASE 303.

WARNING

Refer to the MSDS available upon request.

PACKAGIN

1L／5L bottle.